datasheet
Halonex® In-rail Module 2 — PoE
OXL-P12-TE
Index
Halonex® In-rail Module 2 — PoE
Halonex® In-rail Module 2 — PoE is an industrial-grade, in-rail Gigabit switch with built-in power supply, fanless operation and full shielding for safe and quiet performance.
It connects via two optical ports using Halonex® Cable, supporting chain or ring topologies. Two RJ45 Gigabit ports provide fast connectivity and up to 15W PoE for connected devices. Fully managed and compatible with FiberUnlimited Cloud Services, it enables centralized monitoring and control of your indoor network.
Product reference
Product name
Halonex® In-rail Module 2 — PoE
Product type
OXL-P12-TE
Supply entity
piece
Features
Daisy chaine POF backbone
"POF-in, POF-out" can create a chain or ring topology of multiple OXL-P12-TE modules
POF data rate
2 POF Easy Lock™ ports, 1 Gbps
RJ45 connection
2 RJ45 ports, 1 Gbps, PoE
PoE standard
802.3af - 15.4W total distributable over both RJ45 ports
Management
Embedded managed switch
Remote management
Integrated with FiberUnlimited Cloud Services (FCS)
Wired data rate
1 Gbps
Latency
<1ms
Housing
Metal, fully shielded; fanless
Characteristics
Remote Management
Integrated with FiberUnlimited Cloud Services (FCS), full configuration & monitoring features
Cloud connection via untagged VLAN or VLAN502
Encrypted and secured link (https, SSL) to FCS
Port management (remote)
VLAN, VLAN group, Multicast VLAN, 802.1Q tagged VLAN
802.1p QoS
Port enable/disable
For RJ45: PoE on/off
Monitoring (via FCS)
Data speed per port
Data traffic
System temperature
Indicator LEDs
1x activate/boot/reset switched power LED
2x RJ45 data connect
2x POF connect
Ports & interfaces
2x Easy Lock ™ port, 1Gbps, for duplex POF 2.2mm; distance 50m
2x RJ45 port, 1Gbps, PoE 802.3af, 15.4W total distributed over ports
Mains (L/N): 2x 1.5/2.5 mm2 terminal block
MIscellaneous
Supports STP for redundancy configuration
Reboot, reset, firmware upgrade via FCS
Integrated UI web server available
POF optical wavelength typically 650nm; pin diode, eye safety class 1
System booting time
<30 sec
Electrical, environmental & installation information
Input voltage
100 - 240 V AC, 50-60Hz
Power consumption
with PoE usage: max. 23W (33VA)
without PoE usage: 6W
Inrush current
10 A (during 10msec)
Environment (room)
General room temperature: -5°C to +40°C
Operating temperature
Ambient environment: -5°C to +50°C - in metal enclosure, at max. load
Max. housing temperature
30°C (measured in 20°C ambient environment)
tc
max. 70°C
Storage temperature
-25°C to +70°C
Storage humidity
5%RH to 90%RH (non-condensation)
Expect. operational lifetime
100,000 hrs (at max. tc, loaded)
Reset
Via mechanical reset button
Remote management
Via FiberUnlimited Cloud Services (FCS)
Dimensions, housing and installation
Overall dimensions
290 x 42 x 37 mm (LxWxH)
Main housing dimensions
260 x 42 x 37 mm (LxWxH)
Weight
0.80 kg
Housing
Metal (silver color)
Installation
Two screw holes for mounting
Protection class
IP20 (DIN EN60529); class II
Output classification
Input: Non-SELV; output: SEL
Miscellaneous
None silicon free

Product indications
Indicator LEDs
The topside of the product contains 5 indicator LEDs providing feedback on the status of the product connections.

Graphical indicators clarify the allocation of the indicator LED to the specific connection ports.
PoE connected power
Following combinations can be powered over Ethernet

Buttons
On the topside of the product a small reset buttons is located. Keeping this button pressed for several seconds will force a reboot of the product.

Power connection
The label indicates the correct connection points for the 230V power supply:
N = neutral line (0V)
L – live line (230V)

Product label

Standards, certifications & compliances
Safety
EN 62368-1
EN 62368-3
EMC
EN 55032
EN 61000-3-2
EN 61000-3-3
EN 55035
Data
802.1x, 802.3af, 802.3bv
Materials
RoHS, REACH
CE
Disclaimer
This datasheet has been produced with great care to reflect the actual technical performance of the product at the date of creation of this document. It is however possible that the actual product at time of production has slightly deviating specifications.